Other products
Components for every purpose
Complete program
Individual components and systems
As a complete provider, HIMA supports you in all functional safety questions. And these questions can be very individual. Consequently, we have a variety of components in the portfolio with which you can precisely tailor your safety systems to your requirements. If your requirement should change, simply adapt your system.
An overview of HIMA relays is provided here. All components meet the requirements of the current norms and standards and are TÜV-tested.
| Type | SIL 2 | SIL 3 | (Ex) | Comment | |||
|---|---|---|---|---|---|---|---|
| H 4116 | x |
| In the terminal box for DIN rail, 24 V DC, switching voltage 250 V AC / 127 V DC, safe isolation | ||||
| H 4133 | In the terminal box for DIN rail, 24 V DC, switching voltage 250 V AC | ||||||
| H 4134 | x | In the terminal box for DIN rail, 230 V AC, switching voltage 250 V AC | |||||
| H 4135A | x | In the terminal box for DIN rail, 24 V DC, switching voltage 250 V AC / 220 V DC, safe isolation | |||||
| H 4136 | x | In the terminal box for DIN rail, 48 V DC, switching voltage 250 V AC / 127 V DC, safe isolation |
Ex-switching amplifier
These components are suitable for use in explosion protection zones.
| Type | SIL 3 | SIL 4 | (Ex) i | Comment | ||
|---|---|---|---|---|---|---|
| H 4007 | x | x | x | In the terminal box for DIN rail, switching amplifier (Ex)i, for controlling intrinsically safe valves and supplying intrinsically safe transmitters, output 24 V DC, ATEX | ||
| H 4011 | x | x | In the terminal box for DIN rail, switching amplifier (Ex)i, safety-related, with galvanic isolation, with short-circuit monitoring, for safety-tested proximity switches | |||
| H 4012 | x | x | In the terminal box for DIN rail, switching amplifier (Ex)i, safety-related, with galvanic isolation, with line-break and short-circuit monitoring, for safety-tested proximity switches |
Ex-HART devices
These components are suitable for use in explosion protection zones.
| Type | SIL 3 | (Ex) i | Comment | |
|---|---|---|---|---|
| H 6200A | x | x | Analog supply isolator with HART output coupling, ATEX |
Here you will find all power supply components at a glance.
| Type | Comment |
|---|---|
| H 7013 | Line filter 24 V DC |
| H 7021 | Line filter 48 V DC |
| H 7201 | Infeed and fuse distribution board |
| H 7202 | Fuse distribution board |
| K 7205 | Current distribution board, max. 63 A, 18 individual circuits with automatic circuit breakers |
| K 7206 | Redundant infeed, max. 63 A, with decoupling |
| K 7207 | Diode on cooling fins, for mounting rail installation |
| K 7212 | Redundant infeed, max. 35 A, with decoupling, max.12 individual circuits with automatic circuit breakers |
| K 7213 | Redundant infeed, max. 35 A, with decoupling, max.12 individual circuits with automatic circuit breakers, without decoupling |
| K 7214 | Current distribution board, 24/48 V DC, max. 150 A sum current, max. 18 individual circuits |
| K 7215 | Current distribution board, 24/48 V DC, max. 150 A sum current, max. 18 individual circuits, extensive monitoring functions |
| K 7216 | Current distribution board, 48 V DC, max. 63 A sum current, max. 32 individual circuits (micro-fuse holder 5x20 mm) |
| K 7901 | Current distribution board, 24/48 V DC, max. 63 A sum current, max. 18 individual circuits |
| K 7915 | Fuse distribution board for safety fuses 15 A, FM certificate |
| M 3421 | Rack for up to three power supply units |
| PS 1000 WR 011 | Power supply unit 100...240 V AC, 24 V DC, 40 A continuous load |
| z6015 | Line filter for network supply 24 V DC |
| z6016 | Voltage failure bridging for network supply 24 V DC, 2 A, 20 ms |
| z6019 | Line filter for network supply 48 V DC |
All HIMA accessory components are provided here.
| Type | Comment |
|---|---|
| Catalog | Control cabinets and power supplies HI 800 054 |
| IP 42 | Extension kit – IP 42 for roof fan K 9202 |
| K 9202B | Cabinet fan unit with two axial fans, with fan-run monitor |
| K 9203A | Insert fan unit with three axial fans, with fan-run monitor |
| K 9212 | Axial fan module for installation in the rack |
| M 2215 | Cover panel for H41q/H51q and Planar F in the 19-inch system in accordance with DIN EN 60297-3 |
| M 3410-M 3419 | Rack in the 19-inch system in accordance with DIN EN 60297-3, pre-wired |
| M 3431-M 3434 | Front panels in the 19-inch system in accordance with DIN EN 60297-3 |
| M 3443, M 3445 | Labeling fields with cable conduit carrier in the 19-inch system in accordance with DIN EN 60297-3 |
| M 3444 | Labeling field with fastening angle brackets in the 19-inch system in accordance with DIN EN 60297-3 |
| M 3446 | Cable tray for line routing in the 19-inch system in accordance with DIN EN 60297-3 |
| M 3447 | Labeling field with three guide rings in the 19-inch system in accordance with DIN EN 60297-3 |
| M 4410 | Extension kit for rack in the 19-inch system in accordance with DIN EN 60297-3 |
| M 4411 | Perforated plate in the 19-inch system in accordance with DIN EN 60297-3 |
| M 4412 | Cable carrier for M 3420 and M 3421 |
| M 4413 | Dummy front panel for rack M 3420 and M 3421, 4U, 28HP |
| M 7201 | Ventilation tray for 19-inch system in accordance with DIN EN 60297-3, 1U |
| M 7202 | Ventilation tray for 19-inch system in accordance with DIN EN 60297-3, 1U with labeling field |
Your HIMA Contact
Do you need support with your HIMA system? The HIMA support organization is ready at any time – an email suffices.
